全自動超聲波清洗機如今在各行各業都有所使用，但有用戶也反映，近來該清洗機的清洗效果不怎么好，這是什么原因造成的呢？

　　Automatic ultrasonic cleaning machine is now used in all walks of life, but there are users also reflect that the cleaning effect of the cleaning machine is not good recently, what is the reason for this?

　　全自動超聲波清洗機的清洗槽內清洗液液位欠好，這會導致清洗不抱負，需求調整清洗機液位來改善清洗作用。超聲波頻率和諧沒有調好就會形成超聲波清洗機清洗不抱負，需求重新調整。

　　The cleaning liquid level in the cleaning tank of the automatic ultrasonic cleaning machine is not good, which will lead to poor cleaning. The level of the cleaning machine needs to be adjusted to improve the cleaning effect. Ultrasonic frequency harmony is not adjusted well, it will form the ultrasonic cleaning machine cleaning ambition, the need to readjust.

　　假如清洗槽內液體溫度過高，也會導致清洗不抱負，因此要控制好清洗液溫度。清洗液選用不妥也是形成超聲波清洗機清洗不抱負的原因之一，需求挑選合適的清洗液。

　　If the temperature of the liquid in the cleaning tank is too high, it will also lead to the cleaning ambition, so it is necessary to control the temperature of the cleaning liquid. Improper selection of cleaning liquid is also one of the reasons for the formation of ultrasonic cleaning machine cleaning ambition, the need to choose the right cleaning liquid.

　　調節超聲功率旋鈕，提高超聲功率。無法達到目的可咨詢工程師。調整液位至很好的高度，不懂好的位置可咨詢客服。調整溫控器的設定值至適宜溫度，不懂適宜溫度可咨詢業務經理了解。機器停止工作，關閉電源；待洗清夜降溫后，更換正確的清洗液。

　　Adjust the ultrasonic power knob to improve the ultrasonic power. If this is not possible, consult an engineer. Adjust the liquid level to the best height, do not know the best position can consult customer service. Adjust the setting value of the thermostat to the appropriate temperature. If you do not know the appropriate temperature, consult the business manager. The machine stops working and turns off the power; Change the correct cleaning solution after the temperature drops overnight.

　　超聲波的高速震蕩能夠對清洗物品的外表進行清潔和滅菌，空化效應顯著，清潔效率也顯著高于人工清洗，而且不會有清潔死角和損壞。但這些作用都是建立在正確的操作過程和合理有用的生產環境下。因此，為了到達更好的清潔作用，操作人員需求注意一些操作事項。

　　Ultrasonic high-speed shock can clean and sterilize the surface of the cleaning items, cavitation effect is significant, cleaning efficiency is also significantly higher than manual cleaning, and there will be no cleaning dead Angle and damage. But these functions are established in the correct operation process and reasonable and useful production environment. Therefore, in order to achieve a better cleaning effect, operators need to pay attention to some operational matters.

　　全自動超聲波清洗機清洗效果不好怎么造成的？以上便是原因以及解決方法，假如出現清洗效果不好時就要快速處理，不影響設備的工作效率。更多布內容可以來網站m.heqingliang.cn咨詢。

　　Automatic ultrasonic cleaning machine cleaning effect is not good how to cause? The above are the reasons and solutions. If the cleaning effect is not good, it is necessary to deal with it quickly, without affecting the working efficiency of the equipment. For more information, please visit m.heqingliang.cn.