The ultrasonic steel mesh cleaning machine is more suitable for cleaning the steel mesh. It saves time, worry and effort. The steel mesh was initially made of metal mesh, so it was called a mask at that time. It started with nylon polyester mesh, followed by durable, slightly colored metal mesh and copper mesh, and then stainless steel metal mesh. However, no matter what kind of wire mesh, it has the disadvantages of poor formability and low precision.

隨著SMT技術的發展，對鋼網的要求越來越高，產生了超聲波鋼網清洗機。由于材料成本和制作工藝的難度和便捷性，原來的鋼網是用鐵銅板制作的，但是因為生銹了，所以用不銹鋼網代替，也就是現在的鋼網。清洗鋼網用超聲波鋼網清洗機更適合，省時、省心、省力。

With the development of SMT technology, the demand for steel mesh is higher and higher, and ultrasonic steel mesh cleaning machine is produced. Due to the material cost and the difficulty and convenience of the manufacturing process, the original steel mesh was made of iron copper plate, but it was rusted, so it was replaced by stainless steel mesh, that is, the current steel mesh. Ultrasonic steel mesh cleaning machine is more suitable for cleaning steel mesh, saving time, worry and effort.

SMT鋼網必須在使用前、期間和使用后清洗，通常鋼網用超聲波鋼網清洗機進行清洗，這種清洗機也被之為超聲波鋼網清洗機，為使鋼網變形平穩，在使用過程中應定期擦拭鋼網底部。鋼網使用后，必須及時超聲波鋼網清洗機清洗干凈，以達到與下次相同的釋放效果。鋼網清洗方法通常包括擦拭和超聲波清洗。用預先浸透的無螺紋布(或特殊的鋼網擦紙)擦拭蠟紙，除去固化的沙克糊或粘合劑。

SMT steel mesh must be cleaned before, during and after use. Usually, the steel mesh is cleaned by ultrasonic steel mesh cleaning machine, which is also called ultrasonic steel mesh cleaning machine. In order to make the steel mesh deformation stable, the bottom of the steel mesh should be wiped regularly during use. After the steel mesh is used, it must be cleaned by ultrasonic steel mesh cleaning machine in time to achieve the same release effect as the next time. Steel mesh cleaning methods usually include wiping and ultrasonic cleaning. Wipe the wax paper with a pre soaked non thread cloth (or special steel mesh wiping paper) to remove the cured Sark paste or adhesive.

超聲波鋼網清洗機既實用、有效、安全、對人和環境都安全，又能成功地將s移到鋼網的s中。有一種特殊的鋼網清洗劑，但請小心，因為鋼網可能會被洗掉。如無特殊要求，可使用酒精或去離子水代替鋼網專用清洗劑。

Ultrasonic steel mesh cleaning machine is not only practical, effective, safe and safe for people and environment, but also can successfully move s to s of steel mesh. There is a special mesh cleaner, but be careful because the mesh may be washed off. If there are no special requirements, alcohol or deionized water can be used instead of special cleaning agent for steel mesh.

有些廠家可能是用手工手洗鋼網的。然而，這種洗手方式非常耗時，而且有些地方很難清潔。無論手動清洗多么仔細，都不可能清洗復雜形狀、開口和其他鋼網表面配置的位置。這是一個頭痛的問題。

Some manufacturers may wash the steel mesh by hand. However, this method of hand washing is very time-consuming, and some places are difficult to clean. No matter how careful the manual cleaning is, it is impossible to clean the positions of complex shapes, openings and other steel mesh surface configurations. This is a headache.

使用超聲波鋼網清洗機來解決問題各種實驗研究表明，與其他清洗技術相比，超聲波清洗節省時間，清洗效果更好。

Various experimental studies show that compared with other cleaning technologies, ultrasonic cleaning saves time and has better cleaning effect.

超聲波鋼網清洗機主要是利用超聲波在液體中的空化、加速和直接流動效應，直接和間接地影響液體和污垢，對污垢層進行分散、乳化和剝離，以達到清洗的目的。高強度、高頻超聲波在清洗液中產生空化，上千個極細氣泡將腔內污染物剝離，有效清洗腔內死角而不損壞腔體。

Ultrasonic steel mesh cleaning machine mainly uses the cavitation, acceleration and direct flow effects of ultrasonic in liquid to directly and indirectly affect liquid and dirt, and disperse, emulsify and peel off the dirt layer, so as to achieve the purpose of cleaning. The high-intensity and high-frequency ultrasonic wave produces cavitation in the cleaning solution, and thousands of very fine bubbles peel off the pollutants in the cavity, so as to effectively clean the dead corners in the cavity without damaging the cavity.