結合目前的使用情況來看，人們主要是將通過式清洗機應用于機械制造行業中，尤其是適用于交通運輸，石水化工，輕工制品以及設備維修等行業的中小零件的清洗。下面來講講通過式清洗機的注意事項及操作事項。

According to the current use situation, people mainly apply the through type cleaning machine to the machinery manufacturing industry, especially to the cleaning of small and medium-sized parts in transportation, petrochemical, light industrial products and equipment maintenance industries. Now let's talk about the precautions and operation of the through type cleaner.

一、注意事項

1、 Precautions

1.本機應由專人保管及使用，以利保養。

1. This machine should be kept and used by a specially assigned person to facilitate maintenance.

2.嚴格按規定的順序操作，以防發生意外

2. Operate in strict accordance with the specified sequence to prevent accidents

3.在工作過程中，操作者因故離開，需停機切斷電源。

3. In the process of work, if the operator leaves for some reason, it is necessary to stop the machine and cut off the power supply.

4.發生故障，及時停機檢修，做到不帶故障開機運行。5.嚴格按操作順序開關機

4. In case of failure, stop the machine for maintenance in time, and start the machine without failure. 5. Switch on and off the machine strictly according to the operation sequence

二、操作事項

2、 Operational matters

1.工作前先檢查清洗液的配方濃度和配方比例是否合適，水箱液面高度是否夠。

1. Before working, check whether the formula concentration and proportion of the cleaning solution are appropriate, and whether the liquid level of the water tank is high enough.

2.用鑰匙將電源控制開關置于開位置

2. Turn the power control switch to the ON position with the key

3.開啟加熱器，使其開始自動加溫。

3. Turn on the heater to start automatic heating.

4.開啟浮油排除裝置開始浮油排除。

4. Open the oil slick discharge device to discharge the oil slick.

5.等溫度升到預定值后即開始工作，操作者根據配電柜按鈕編號開啟開關，按每個單動按鈕，使水泵，吸霧，輸送等全部動作。

5. Start working when the temperature rises to the preset value. The operator turns on the switch according to the button number of the power distribution cabinet, and presses each single action button to make the water pump, fog suction, transportation, etc. all act.

6.當機器運行后，操作工人便可以在裝料口不斷地把零件裝載輸送網帶，清洗，漂洗，吹干，輸出，在卸料口取下清洗好的零件。

6. When the machine is running, the operator can continuously load the parts into the conveyor belt at the loading port, clean, rinse, blow dry, and output, and then take down the cleaned parts at the unloading port.

該設備整體包括有很多個系統，分別有機體及加熱與溫控系統、過濾系統、輸送系統、噴淋系統、吹干系統、電氣控制系統等組成。其機體主要是由機架、罩殼及水箱組成。整機結構緊湊，外型美觀大方，功能齊全。您有什么需求就來我們網站m.heqingliang.cn進行咨詢！

The equipment as a whole consists of many systems, including organism and heating and temperature control system, filtering system, conveying system, spraying system, drying system, electrical control system, etc. The machine body is mainly composed of a frame, a cover and a water tank. The whole machine has a compact structure, beautiful appearance and complete functions. If you have any needs, please come to our website m.heqingliang.cn for consultation!